Welcome to your deal finder

PlasticARM is a 32-bit bendable processor


Image of the plasticARM processor, showing its dimensions and components.

Biggs, et. al.

Wearable electronics, like watches and fitness trackers, represent the next logical step in computing. They’ve sparked an interest in the development of flexible electronics, which could enable wearables to include things like clothing and backpacks.

Flexible electronics, however, run into a problem: our processing hardware is anything but flexible. Most efforts at dealing with that limitation have involved splitting up processors into a collection of smaller units, linking them with flexible wiring, and then embedding all the components in a flexible polymer. To an extent, it’s a throwback to the early days of computing, when a floating point unit might reside on a separate chip.

But a group within the semiconductor company ARM has now managed to implement one of the company’s smaller embedded designs using flexible silicon. The design works and executes all the instructions you’d expect from it, but it also illustrates the compromises we have to make for truly flexible electronics.

Not quite CMOS

The basic idea behind flexible electronics is remarkably simple: start with a flexible substrate (like a plastic or paper) and use it as a substrate for fabricating a thin layer of a flexible semiconductor. A variety of semiconductors fit the bill, ranging from atomically thin materials to semiconducting polymers. But most of the options aren’t mature technologies with regard to their use in the fabrication of logic gates, so working with them involves two layers of experimentation—both with the materials themselves and with their flexibility.

Amorphous silicon is a somewhat familiar option. The silicon used in the manufacture of existing processors is crystalline, meaning it’s in the form of an ordered array of atoms. Amorphous silicon isn’t, and it’s flexible as a result. Plus we know how to work with amorphous silicon, since we use it for things like solar panels and LCDs. It’s also inexpensive, partly because it can be processed into transistors through simpler techniques than needed for crystalline silicon.

The downside is that amorphous silicon comes up short by a number of measures, including performance, power efficiency, and circuit density. That said, a lot of the potential uses for flexible electronics don’t require much in the way of performance.

PlasticARM

In keeping with the idea of minimal performance requirements, the team at ARM worked with PragmatIC Semiconductor to implement a version of Arm’s Cortex M0+ processor, termed PlasticARM. The M0+ is a 32-bit processor that can execute a simplified subset of the ARM “thumb” instructions; it’s optimized for small sizes and low power use, and it is generally used as an embedded processor.

Even by the standards of a very simplified processor, PlasticARM had some distinct features that set it apart. For one thing, the small bits of memory that processors use to store the data they’re working on (called “registers”) are normally located in the processor itself, because it kills performance to go to external RAM in order to read this memory. To simplify the PlasticARM’s processor, the CPU’s registers are located in a reserve section of the RAM—and the system was made with only 128 bytes of RAM.

The system and applications that run on PlasticARM are held in a 456 byte ROM chip which is also separated from the processing hardware. Right now, the ROM can’t be updated (it’s read-only), but the team hopes to change that in the next iteration.

All the key pieces—the processor, the RAM, the ROM, and the interconnects—were made using amorphous silicon and fabricated on a flexible polymer. The system also has pins for off-chip communications.

Overall, the performance isn’t good. Its maximum clock speed is a stately 29 kilohertz, and it consumes about 20 milliwatts at that speed. That may sound like very little, but an M0+ implemented on standard silicon only needs a bit over 10 microwatts to hit a megahertz. On the positive side, it has over 18,000 individual gates, which is over an order of magnitude higher than any previously described flexible processor. It also successfully executed all the software in its ROM, although the researchers only tested this without bothering to use the processor’s distinctive feature—they never actually flexed it.

Next steps?

Yes, the team is already planning on next steps. Those mostly involve reducing power consumption, which is appropriate given the gap between its performance and that of standard silicon. The researchers also hope to get the gate count up over 100,000, though they think the approach will end up maxing out somewhere below a million gates.

Why are they pursuing this? The paper describing the processor wraps up by talking about the potential of an “internet of everything,” where things like clothing and food packaging can have a flexible processor slapped on them. The paragraph is vague about what this will get us, simply suggesting it would “unravel innovations” without suggesting what those innovations might be.

That said, plenty of researchers are working on embedding sensors and small power sources into things like clothing, with the goal of monitoring everything from activity to environmental exposures. Some of these uses will need something to manage their behavior and data, and a flexible processor would make sense there.

Nature, 2021. DOI: 10.1038/s41586-021-03625-w  (About DOIs).



Source link

We will be happy to hear your thoughts

Leave a reply

Logo
Enable registration in settings - general
Compare items
  • Total (0)
Compare
0